
"Trans-Flo Transfer System paid
for itself with lower fuel cost and wear-and-tear on our trucks."
MJ, Jones & Sons
|
TFC Transfer Systems move bulk materials profitably
A
TFC Transfer system moves dry bulk materials from storage to process
replacing outdated screw conveyors and bucket elevators. The efficient
system is economical to operate. Since there are only two moving parts,
maintenance is greatly reduced. A complete transfer system consists
of a Feeder attached to the storage bin, a Motor/Blower which supplies
the air and a Power Panel which controls the system.
The TFC Transfer System

Transfer System Components
- A Motor Blower ranging in capacity from 10 hp to 60 hp is installed
ahead of the Feeder.
- The Saf-T-Pak between the Motor/Blower and Feeder containing a check
valve which prevents material from blowing back through the line into
the blower, a pressure gauge which visually displays pressure in the
pipeline and a pressure relief valve.

Model 1000
|

Model 2000
|
Inside
of Feeder |
- A Feeder Model 1000 or 2000 is attached to the storage bin. The
Feeder is a rotating vane device. As vane blades rotate, they sweep
material into the air line. At all times, four of the five vanes form
a seal to prevent air from blowing into the storage bin.
 |
- A Power Panel contains the electrical components and controls
to automatically coordinate the Motor/Blower with the Feeder.
|
Options
Sweeping elbows Centrifugal discharge terminal
Silencer Pak TFC Quick pipe connectors
Transfer systems specifications
Model
Number
|
Motor/
Blower
(hp)
|
Air
Flow
(cfm)
|
Air
Pressure
(psi)
|
1100-ER-A*
|
10
|
175
|
12
|
1200-ER-A*
|
20
|
250
|
12
|
1300-ER-A*
|
30
|
350
|
12
|
1400-ER-A*
|
40
|
350
|
12
|
1450-ER-A**
|
40
|
440
|
12
|
1650-ER-A**
|
60
|
550
|
15
|
* Equipped with Model 1000 Feeder
** Equipped with Model 2000 Feeder
|
Feeder
- Model 1000 - 4" outlet
- Model 2000 - 4" to 6" outlet
- Five vane design with replaceable vane wear tips
- Industrial hard chrome plating inside cylinder and both end bells
- Sliding Maxi-Flo control gate
- 1½ hp motor
- 19.7 rpm operation
- Dimensions: H=27½"*, W=27", L=38"
*Model 2000 same dimensions except
taller
Motor/Blower
- 10 hp - 175 cfm, 12 psi
- 20 hp - 250 cfm, 12 psi
- 30 hp - 350 cfm, 12 psi
- 40 hp - 350 cfm, 15 psi
- 60 hp - 550 cfm, 15 psi
Power Panel
- Manual push button controls
- Automatic sequencing
- Motor fuses and overload heaters
- NEMA 12 weather-proof cabinet
- Main fuse disconnect
 |
TRANS-FLO
Phone: 574-472-1095
Fax: 574-288-4084 |
Send e-mail to sales@trans-flo.com
with questions or comments about this web site.
© 2012 Trans-Flo
|
|
 |